Pure (full) solid wood furniture, furniture all material is solid wood, including desktop, closet doors, side plate are made of pure real wood, do not use any other means of man-made board. Pure solid wood furniture is very high demand for technology and material. The select material of real wood, the demand such as drying, refers to receive, flat-fell seam is very strict. Which procedure, lax, if small, easy to crack, loose connection place such as appearance, is a complete set of furniture can present deformation, which can’t use. Hardwoods, Chinese style furniture is the typical representative of this kind of furniture.
Contact plate wood furniture: look from the exterior is solid wood furniture, the natural grain of lumber, handle and colour and lustre and solid wood furniture, but in fact is a mixture of solid wood and man-made board furniture, namely choose real wood frame, side panel, bottom and top, shelf parts with decorated on the surface of man-made board. Currently most of the real wood furniture that sells on the market for contact plate wood furniture.
So how we will identify and solid wood furniture of choose and buy?
A: look at is real wood furniture is the whole piece of wood, first to see the wood grain and scar knot. Such as a closet door, the surface looks is a kind of pattern, then the corresponding location on the back of the cupboard door, look at this pattern change bearing, if be opposite due to excellent is pure solid wood cabinet. Other see scar knot is also a good way to identification of pure wood: there is scar knot on one side of the location, and then on the other side to find whether have corresponding markings.
Smell: choose real wood furniture after open cupboard door or drawer, nose to smell. Pure wood has its special flavor, even if still have the smell after long time deposit or finishing, and there are a lot of wood will be kept light taste, there was a flavor of loose fat such as pine, cedar, fragrant, spicy cedar, fir with common smell, camphorwood obvious camphor, basswood stank oil gently, annatto cut will have dense pungent aroma, walnut there will be a small bulbs, many Chinese wood has no smell, man-made board will have a very strong smell of chemical materials, such as formaldehyde, etc., will be a great recognition.
Knock knock three: solid wood parts with handle gently will announce a loud sound, sound and man-made board is depressed, box of wood will announce drumming drums.
Four phase modulation: according to the weight of the wood is divided into three: lightweight boring of paulownia wood, heavyweight pine, basswood, autumn wood, etc. In northern China called the medium density wood soft miscellaneous wood (except pine), heavyweight except the hardwoods, such as red wood, rosewood, rosewood, oak wood, northeast China ash, birch and willow eucalyptus wood imports are called hard miscellaneous wood, to sum up the wood furniture are lighter than particle board, medium density fiberboard (MDF) furniture.
Special attention should be paid to the moisture content of solid wood furniture, wood and origin. Domestic regional climate for wood moisture content is influential, wood moisture content shall not be higher than using the regional local equilibrium moisture content of 1%, or timber is simple cracking deformation.
Because of this, want a choose and buy equipment and technology, good company makes boring boring of annatto furniture, near or far from annatto furniture is not important, the key is the moisture content is consistent with the use of regional balance moisture content. There is a old words “real wood but the Yangtze river”, that is to say after produced solid wood furniture in the south to the north, due to the climate influence moisture content, and then simple present craze, deformation, such as questions, so the choose and buy time to see the origin of a product.